Site Migration and Beta builds

NIVBOT · 2026-08-29T22:24:18Z

Hello Everyone, Let's hope the old saying "The third times a charm" holds true. As this is my third time making this post. It started with a very bad web host to a crazy day and night of migrating. Anyway, I think the worst of all of that is over so if you had issues logging in or doing anything on the site that its why. The migration is complete and hopefully no one will have to wait 10 minutes for their page to load if it even does. Now, that being said, let's get to the real reason for this post. I have completed beta versions of each natively coded GUI for OSX, Win64 and Linux (mint). I would say they are roughly 95% complete. They just need a little bit of polish and a few things added that I am either mulling over or would like feedback on if possible. I can tell you though that they are working great and I'd like to share them with you and hopefully you'll give me feedback. Don't worry about hurting my feelings and let me know if you have issues or dislike something. Criticism of this type only helps and there is nothing offensive about it. OK, that said. Let me go over a little bit. As I said these Beta builds are basically complete I just want some time to look over everything, do a little pre-release clean up etc. The core of the GUI system is the same as before. Load your files, you can batch save, or load the file and edit it then send to Vetus and either save or run it. Just like before. There are some changes though that I need to make you aware of so that you can test them with confidence. Without further ado. - The new firmware is version 2.0.0. The old GUIs will not work with Vetus that has this firmware installed. The new GUIs will only work with firmware 2.0.0 and up. And vice versa. the new firmware will not work with the old GUIs. So if you update one, update them all. You can of course revert in the same way you upgrade. - Tests no longer require that all three arguments be added to your code if an opcode doesn't use them. In fact, you will now get an error if you ad an extra argument. That being the case, if you load an old test script that has all of the arguments for every opcode you will get a bunch of errors. These aren't critical, you just need to delete the extra arguments. I have also redone all of the current tests in the new style so those are there for you as well. - You no longer need to use HEX in your arguments. You may use decimal or binary or HEX at your leisure. Code imported from a test on Vetus will still import with HEX values and any DIM variable shown as it's value rather then the variable name. Just as before. This however, is not the case with addresses. Because of the way addresses are setup you must still use the HEX value for each address pin as before. - There are now tool bars beside the editor for each OpCode that give a short description and allows you to insert the arguments. For OpCode that require pins there is an optional mock chip that allows you to set the pins visually. You can also do this for addresses making the HEX value method trivial as it will write the values for you when you select the pins. - Connections are much better than before. You should have few if any issues reconnecting if you unplug, turn off or close the GUI. You should no longer have times where you need to turn off Vetus or restart the GUI to connect. It COULD happen I suppose, I haven't had it happen yet though so it is rather secure in that way. - Also for connections, uploads are much faster and way more reliable. Batch uploads are especially faster. - Serials - Serial numbers are no longer stamped on the PCB, serials are now created algorithmically from the STM32's serial number. It is not the same serial it is just derived from it. When you start Vetus you will see the serial and you will also see it when you connect to the GUI. - Settings. settings have now been moved totally to the GUI Menu. There are not many as a lot of the previous settings can now be set in other ways in the GUI, from normal use. - Fonts manager has been added. you can create, open font files and upload them to one of 6 slots on the left hand side. By selecting a slot you can delete or save a font to that slot. Fonts cannot be imported from Vetus and edited you must use a file to create or upload the font. I'll include the original two here. - Image manager, you can now edit images if you'd like. Images can be created from scratch sent to a file or sent to Vetus. As of right now, the images in Vetus are called from an index and as such you cannot select the slot you add the image to. It will always go to the last slot (256 total). Also, I haven't yet decided how to implement deleting images. So as of now you cannot. this will change soon but I'm weighing options. Images are compressed via RLE well my own RLE I don't know if it is what a typical RLE would be but anyway, you don't need to now that stuff but you will see the code for the image at the bottom. Just know that the more colors you hav...

Page 2 / 2 Prev

Retrotroniks

Last Post by NIVBOT 1 month ago

6 Posts

1 Users

0 Reactions

311 Views

RSS

Posts: 121

NIVBOT

Admin

Topic starter

Aug 29, 2026 10:29 pm

(@nivbot)

Member

Joined: 1 year ago

fonts for you to check out and use as examples.

vetus-fonts.zip

Page 2 / 2 Prev

4 Forums
38 Topics
224 Posts
2 Online
50 Members

Forum Icons: Forum contains no unread posts Forum contains unread posts

Topic Icons: Not Replied Replied Active Hot Sticky Unapproved Solved Private Closed

Forum

Site Migration and Beta builds

About us

Support

Resources

Get In Touch